HIGHLIGHTS
- High-grade laboratory assays confirm the discovery in Trench 1 ( T1) within the emerging Smaala–Oulmès structural corridor.
- T1 Intercept provides a length-weighted average intercept of 2m @ 22.69% Sb.
- Peak assay of 37.14% Sb returned from massive stibnite mineralisation.
- Strike continuity confirmed 185 m away in step-out Trench 1A (T1A) with a length-weighted average intercept of 3 m @ 4.04% Sb.
- Results confirm the dual-parameter geophysical signature (high chargeability/high resistivity) identified in the August 2025 survey.
- Permitting finalised for the remaining seven trenches ( T2–T8) along the 4 km mineralised strike.
3 March 2026 - Zeus Resources Limited (“Zeus” or the “Company”) is pleased to announce high- grade antimony (Sb) assay results from the first stage trenching at the Casablanca Antimony Project (“CAP”) in central Morocco.
Following the visual mineralisation reported on 2 February 2026 (“Visible Antimony Oxide Mineralisation Observed in Trench 1 at Casablanca Project”), initial laboratory assays from Trench 1 (T1) and Trench 1A (T1A) have confirmed a robust, high-grade quartz–stibnite system. These results delineate a significant structural corridor along the Smaala–Oulmès Fault Zone, which is the primary control on mineralisation across the 78.6 km2 project area.
Figure 1: Location of trenches as Casablanca Antimony Project

| UTM WGS 84 - Zone 29 | |
Trench No. | West | North |
TR - 1 | 6.465143 | 33.05073 |
TR-1A | 6.463706 | 33.05187 |
TR - 2 | 6.462877 | 33.05288 |
TR - 3 | 6.459179 | 33.05642 |
TR - 4 | 6.445331 | 33.07197 |
TR - 5 | 6.44168 | 33.07515 |
TR - 6 | 6.437509 | 33.07273 |
TR - 7 | 6.431330 | 33.08299 |
TR - 8 | 6.428053 | 33.08248 |
Table –1 CAP Trenches Program Coordinates
Trench T1A was designed as a step-out to test the strike continuity and lateral extent of quartz-hosted antimony mineralisation identified at T1 within a defined mineralised corridor. As part of a systematic trenching programme, Zeus intends to complete up to nine trenches across the CAP licences (Figure 1), with Trenches T2– T8 currently awaiting approval. Trenches T1 and T1A, located approximately 185 metres apart along strike, have returned initial assay results confirming surface continuity of antimony mineralisation, supporting the potential scale of the system and providing a strong foundation for ongoing step-out trenching and targeted drill planning.
Trench Results – T1–T1A Structural Corridor
Trenching at T1 has successfully exposed a sub-vertical quartz–stibnite vein system hosted within folded sandstones and shales. Continuous 1-meter channel sampling returned high-grade results that correlate precisely with the high -chargeability anomalies (10 to 18 mV/V) modelled at depth.
Continuous 1-metre channel sampling at T1 (Figure 2) returned 2 metres averaging 22.69% Sb, with a peak assay of 37.14% Sb. The higher-grade interval is associated with increased quartz veining and visible sulphide (stibnite) mineralisation in the exposed vein system.

Figure 2: Trench T1 cross-section showing quartz–stibnite veining and channel sample results of
2m @ 22.7% Sb (length-weighted average).
Table 2: Trench T1 Channel Sample Results
Sample ID | Weight (kg) | Sb (%) | Sample Type |
T1-01 | 0.489 | 0.02 | Grab |
T1-02 | 0.640 | 0.02 | Grab |
T1-03 | 0.561 | 0.01 | Grab |
T1-04 | 0.478 | 0.40 | Grab |
T1-05 | 0.498 | 0.01 | Channel |
T1-06 | 0.439 | 0.02 | Grab |
T1-07 | 0.378 | 3.17 | Grab |
T1-08 | 0.663 | 27.41 | Grab |
T1-09* | 0.893 | 21.37 | Channel |
T1-10* | 0.726 | 37.14 | Channel |
T1-11 | 0.476 | 16.21 | Grab |
T1-12 | 0.579 | 2.47 | Grab |
T1-13* | 0.451 | 9.47 | Channel |
T1-14 | 0.492 | 0.06 | Channel |
T1-15 | 0.818 | 0.02 | Grab |
T1-16 | 0.793 | 0.43 | Grab |
Widths are apparent. True width unknown at time of reporting.
*T1-09, T1-10, T1-13 used in channel sampling and the length- and mass-weighted average calculations (disclosed per JORC Table 1), with length-weighted values adopted (22.69% v
24.39% Sb).
Trench 1A (T1A) was positioned 185 m along strike to the northwest to evaluate the lateral persistence of the corridor. Assays confirm the system remains open, returning 3m @ 4.04% Sb (including T1A-01 to T1A-04). Mineralisation in T1A is predominantly oxidised (stibiconite and valentinite), representing the weathered surface expression of the primary stibnite vein system.
Grab samples (T1-06, 07, 08, 11 and 12) from exposed quartz–stibnite veins returned elevated antimony grades, consistent with mineralisation observed in channel samples. Although grab samples are selective and not representative of the average grade, they provide qualitative support for the presence of high-grade mineralisation within the system.

Figure 3: Trench T1A cross-section showing oxidised mineralisation with channel sample results of 3m @ 4.04% Sb. Top Right image: T1A-03, Bottom Right image: T1A-02
Together, the results confirm the persistence of quartz veining and antimony mineralisation along strike within the same mineralised corridor.
Table 3: Trench T1 Channel Sample Results
Sample ID | Weight (kg) | Sb (%) | Sample type |
T1A-01* | 0.527 | 4.40 | Channel |
T1A-02* | 0.380 | 5.91 | Channel |
T1A-03* | 0.441 | 1.01 | Channel |
T1A-04* | 0.486 | 4.85 | Channel |
T1A-05 | 0.372 | 0.06 | Grab |
T1A-06 | 0.443 | 0.01 | Grab |
T1A-07 | 0.737 | 0.02 | Grab |
* Length-weighted and mass-weighted average values correspond (4.04 v 4.02% Sb)
Integrated Geophysics and Predictive Model
The high-grade intercepts in T1 align with the chargeability and resistivity anomalies outlined in the Company’s 9 September 2025 announcement. The geophysical models indicate these targets increase in strength with depth beyond the 200 m imaging limit, suggesting substantial potential for mineralised bodies at depth. The discovery of 37.14% Sb exactly above a major Induced Polarisation (IP) anomaly materially lowers exploration risk for the remainder of the 4 km strike length.
Zeus Executive Director, Hugh Pilgrim, commented:
“Initial trenching and laboratory results at Casablanca are highly encouraging, confirming exceptional near-surface antimony grades and strong along-strike continuity within a robust quartz–stibnite system. The identification of a high- grade core exceeding 22% Sb validates the Company’s targeting approach and demonstrates clear potential for scale. With the Smaala–Oulmès Fault Zone now recognised as a high-grade mineralised corridor, the Company is rapidly advancing exploration to test the remaining 3.8 kilometres of strike.”
Follow-up Work
With Forestry Department approvals now in place for the broader footprint, Zeus has commenced mobilisation for the remaining seven trenches (T2–T8). These trenches are designed to test strike extensions and parallel vein systems identified during mapping and geophysics. Results from this program will form the basis for a maiden drilling campaign targeted for Q2 2026.
Zeus will continue to update shareholders as trenching progresses across remaining trenches (T2, T3, T4, T5, T6, T7 and T8) (refer to coordinate table below).
Table – 4 CAP Trenches Program Coordinates and Details
| UTM WGS 84 - Zone 29 |
| ||||||
Trench No. | West | North | Strike | Length (m) | Width (m) | Depth (m) | Status | Notes |
TR - 1 | 6.465143 | 33.05073 | N135 | 24 | 1 | 2.5 | Completed | Stibnite Observed |
TR-1A | 6.463706 | 33.05187 | N135 | 15 | 1 | 1.5 | Completed | (stibiconite and valentinite), |
TR - 2 | 6.462877 | 33.05288 | N135 | 15 | 1 |
|
|
|
TR - 3 | 6.459179 | 33.05642 | N135 | 15 | 1 |
|
|
|
TR - 4 | 6.445331 | 33.07197 | N135 | 15 | 1 |
|
|
|
TR - 5 | 6.44168 | 33.07515 | N135 | 15 | 1 |
|
|
|
TR - 6 | 6.437509 | 33.07273 | N135 | 15 | 1 |
|
|
|
TR - 7 | 6.431330 | 33.08299 | N135 | 15 | 1 |
|
|
|
TR - 8 | 6.428053 | 33.08248 | N135 | 15 | 1 |
|
|
|
Total | 144 m |
| ||||||
The Board authorised the release of this announcement to the ASX.
End
For further information or enquiries please contact director Hugh Pilgrim on Mobile Number 0449 581 256.
Zeus Resources Limited
Email: info@zeusresources.com
Website: www.zeusresources.com
About Zeus Resources Limited
Zeus Resources Limited is an emerging explorer focused on high-impact critical mineral projects in underexplored jurisdictions. Led by a multidisciplinary team with proven experience in resource discovery, project development, and corporate growth, Zeus is committed to creating early-stage value through disciplined exploration and strategic advancement of its portfolio.
The Company is listed on the ASX with the ticker ZEU and secondary listed on Frankfurt with code ZEU (WKN A1J8CV).
About Casablanca Antimony Project
The Casablanca Antimony Project is a high-grade mineral exploration project located in central Morocco and comprises six granted exploration licences targeting antimony mineralisation.
During site due diligence, twenty (20) rock-chip samples collected from stibnite- bearing quartz veins across the southern licence area returned high-grade antimony results ranging from 7.8% to 46.52% Sb, confirming the presence of significant surface mineralisation. 1
Subsequent trenching has now further validated this mineralised system. Continuous channel sampling at Trench T1 returned 2 metres averaging 22.69% Sb, with a peak assay of 37.14% Sb, while step-out trench
T1A, located approximately 185 metres along strike, returned 3 metres averaging 4.04% Sb. These results confirm the strike continuity of quartz-hosted antimony mineralisation within the defined corridor.
1 ASX release 9 April 2025 – Zeus Strike Exceptional High Grade Antimony of 46% & 40% Sb
Antimony is classified as a critical mineral by major economies including US, EU, Japan and Australia, due to its vital role in flame retardants, lead-acid batteries, and semiconductors - essential to the defence, energy storage, and electronics sectors. With supply constrained and dominated by a small number of producers, antimony is increasingly viewed as a strategic material. Zeus provides investors with direct exposure to this essential and supply-constrained market.
About Morocco’s Mining Industry
Morocco’s modern exploration and mining regulatory framework provides an attractive destination for mining investment. Morocco's mining sector continues to attract foreign investment and offers significant opportunities for exploration and development, particularly in antimony. Morocco’s well resolved mining & exploration strategy presents a unique opportunity to Zeus including • Stable and Mining-Friendly Government • Strong Geological Potential • Modern Mining Code • Strategic Location • Skilled Workforce & Local Expertise • Political and Economic Stability.
Forward Looking Statements
This announcement contains ‘forward-looking information based on the Company’s expectations, estimates and projections as of the date the statements were made. This forward-looking information includes, among other things, statements concerning the Company’s business strategy, plans, development, objectives, performance, outlook, growth, cashflow, projections, targets and expectations, mineral reserves and resources, results of exploration and related expenses. Generally, this forward-looking information can be identified by using forward-looking terminology such as ‘outlook’, ‘anticipate’, ‘project’, ‘target’, ‘potential’, ‘likely’, ‘believe’, ‘estimate’, ‘expect’, ‘intend’, ‘may’, ‘would’, ‘could’, ‘should’, ‘scheduled’, ‘will’, ‘plan’, ‘forecast’, ‘evolve’ and similar expressions. Persons reading this announcement are cautioned that such statements are only predictions, and that the Company’s results or performance may differ materially. Forward-looking information is subject to known and unknown risks, uncertainties and other factors that may cause the Company’s actual results, level of activity, performance, or achievements to materially differ from those expressed or implied by such forward -looking information.
Competent Person Statement
The information in this release that relates to Exploration Results is based on information compiled by Mr Baker Khudeira who is a Member of the Australian Institute of Mining and Metallurgy (MAusIMM - 230652) Mr Khudeira is a consultant to ZEU. Mr Khudeira has sufficient experience which is relevant to the style of mineralisation and type of deposit under consideration and to the activity which he is undertaking to qualify as a Competent Person as defined in the 2012 Edition of th “Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves”. Mr Khudeira consents to the inclusion in this announcement of the matters based on information in the form and context in which it appears.
Link to the original release in full length: